KEIL NXP LPC1857 EVAL BOARD.
The Keil MCB1800 Evaluation Boards enable you to create and test working programs based on the NXP LPC1850 family of ARM Cortex-M3 processor-based devices. The MCB1800 Evaluation Board is available in two different configurations: The MCB1850 Evaluation Board is populated with an NXP LPC1850 device The MCB1857 Evaluation Board is populated with a NXP LPC1857 device Features: 180MHz ARM Cortex-M3 processor-based MCU in LBGA256 On-Chip SRAM: 136KB (LPC1857), 200KB (LPC1850) On-Chip Flash: 1MB dual bank (LPC1857), no on-chip Flash (LPC1850) On-Board Memory: 16MB NOR Flash, 4MB Quad-SPI Flash, 16 MB SDRAM, & 16KB EEPROM (I2C) Color QVGA TFT LCD with touchscreen 10/100 Ethernet Port High-speed USB 2.0 Host/Device/OTG interface (USB host + Micro USB Device/OTG connectors) Full-speed USB 2.0 Host/Device interface (USB host + micro USB Device connectors) CAN interfaces Serial/UART Port MicroSD Card Interface 4 user push-buttons + reset Digital Temperature Sensor (I2C) Analog Voltage Control for ACD Input Audio CODEC with Line-In/Out and Microphone/headphone connector + Speaker Debug Interface Connectors 20-pin JTAG (0.1 inch) 10-pin Cortex debug (0.05 inch) 20-pin Cortex debug + ETM Trace (0.05 inch)RoHS compliance Development Software The MCB1800 Evaluation Board and Starter Kit includes the MDK-ARM Lite Edition Tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB1800 evaluation board, and a Quickstart guide are included. Ordering Information The MCB1800 is available as a stand alone evaluation board or as a starter kit which includes the ULINK-ME debug adapter. MCB1850: MCB1850 evaluation board MCB1850UME: MCB1850 starter kit (includes ULINK-ME) MCB1857: MCB1857 evaluation board - available Q3,12 MCB1857UME: MCB1857 starter kit (includes ULINK-ME) - available Q3,12 Technical Specs: MCB1800: www.keil.com/mcb1800/ Cortex-M Evaluation Board Comparison: www.keil.com/boards/cortexm.asp