Opella-XD for ARC
Ashling's OPELLA-XD is a powerful cJTAG/JTAG debug probe for embedded development with Synopsys' DesignWare ARC configurable RISC cores. Developed in cooperation with Synopsys, the Opella-XD probe integrates with the MetaWare or GNU GDB Debuggers under Windows or Linux based hosts.
Features: Advanced features of Opella-XD include: Fast, easy-to-install USB 2.0 High-Speed Interface (480Mb/s) Supports all popular hardware debug protocols Unique Auto-conditioning Probe provides maximum possible download speed to target with fastest cJTAG/JTAG clock frequencies Hot-plug support allows post-mortem debugging Fast, trouble-free Plug-and-Play installation Supplied with 20-pin Target Probe Assembly for Debug interface to target device or target FPGA. Optional 15-pin D-Type JTAG adapter for Debug interface to target device or ARCangel board. Opella-XD supports FPGA Programming on ARC FPGA targets (e.g. ARCangel) or users target board Wide target voltage range: 0.9V to 3.6V Versatile Target-Reset and Test-Port-Reset support Built-in diagnostics instantly show status of Target, Debug Probe and USB link Benefits of Opella-XD to the embedded hardware developer: Accelerates the entire embedded-hardware debug process: ultra-fast installation, code download and flash programming saves time at every code rebuild Instantly auto-configures to target system Long-term investment: works with all popular target architectures and compilers Helps with the most difficult debugging tasks: hardware bring-up, operating-system booting, post-mortem debugging Future-proof: works with latest hardware-debug protocols, all popular host operating-systems Compact, easy-to-install target probe cables support all popular debug interfaces Opella-XD Debug Probe Specification: High-speed USB2.0 (480Mb/s) interface to host PC Target cJTAG/JTAG clock rates up to 100MHz Auto-conditioning for fast cJTAG/JTAG clock frequencies Configurable Target-Reset and Test-Port-Reset, under full user control Fine-grained adjustment of cJTAG/JTAG clock frequency from 1KHz to 100MHz Supports target operating voltages from 0.9V to 3.6V. Opella-XD detects and automatically configures for the appropriate target voltage. Hot-plug support; allows connection to a running target without resetting or halting Fully powered by USB interface; no external power-supply needed Display/read/write of target system memory and peripheral registers Support for all on-chip hardware breakpoints; unlimited software breakpoints Target Reset control and Remote Reset detect Run/stop control of target application including go, halt, step over, step into and step out of Operates with ARCs MetaWare or GNU GDB Debuggers under Windows or Linux based hosts Support for Multi-core debug Support for multiple Opella connected to the same PC (this supports Multi-core systems where each core has a unique cJTAG/JTAG interface) ARCangel Development Board System FPGA programming support; allows easy configuration using an Opella connection between your host PC and ARCangel All EM, ARCtangent-A4, ARCtangent-A5, ARC 600, ARC 700, Energy Pro EP20 and EP30 cores are supported. Technical Specs: Ashling: www.ashling.comData Sheet: www.ashling.com/images/stories/pdfs/pdf_datasheets/ds323-opella-xd-arc.pdf?phpMyAdmin=IGkACjaK7Q74kVE-VqrLF0LC095