KEIL ULINK-PRO DEBUG & TRACE UNIT.
Features: The KEIL ULINKpro Debug and Trace Unit connects your PC's USB port to your target system (via a JTAG, Cortex Debug, or Cortex Debug+ETM connector). It allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKPRO, together with MDK-ARM, provides extended on-the-fly debug capabilities for Cortex-M devices. You are able to control the processor, set breakpoints, and read/write memory contents, all while the processor is running at full speed. High-Speed data and instruction trace are streamed directly to your PC enabling you to analyze detailed program behaviour. Technical Specs: Supports ARM7, ARM9, Cortex-M0, Cortex-M1, Cortex-M3, and Cortex-M4 devices JTAG support for ARM7, ARM9, and Cortex-M Serial Wire Debug (SWD) support for Cortex-M Serial Wire Viewer (SWV) Data and Event Trace for Cortex-M up to 100Mbit/s (Manchester mode) Instruction Trace (ETM) for Cortex-M3 and Cortex-M4 up to 800Mbit/s (not supported with ULINKpro D) Unique Streaming Trace direct to your PC, provides unlimited trace buffer JTAG Clock Speed up to 50MHz Supports Cortex-M devices running at up to 200MHz High-Speed Memory Read/Write up to 1MBytes/sec Seamless integration with the Keil µVision IDE & Debugger Wide target voltage range: 1.2V - 3.3V, 5V tolerant Support for 5V only devices using optional 5V Adapter Optional Isolation Adapter provides electrical isolation from the target system USB 2.0 High-Speed connection USB powered (no power supply required) Target Connectors 10-pin (0.05") - Cortex Debug Connector 20-pin (0.10") - ARM Standard JTAG Connector 20-pin (0.05") - Cortex Debug+ETM Connector The unique streaming trace capabilities of ULINKpro delivers sophisticated analysis features such as: Complete Code Coverage information about your program's execution ensures thorough application testing and verification Performance Analysis using the Execution Profiler and Performance Analyzer enable you to identify program bottlenecks, optimize your application, and to isolate problems Streaming instruction trace requires the target device to have ETM (Embedded Trace Macrocell) Note: ULINKpro support is available in MDK 4.02 or higher ULINKpro D support is available in MDK 4.73 or higher Technical Specs: ULINK-PRO: www.keil.com/ulinkpro/ Product Selector: www.keil.com/ulink/